Fuser Exit Sensor Removal - Lexmark C540n Service Manual

Fuser exit sensor removal

See "Fuser exit sensor" on page 7-7
1.
Open the front cover.
2.
Remove the right cover assembly. See
3.
Remove the left cover. See
4.
Disconnect the two-wire fuser cable (A) from the LVPS.
Note: You do not have to extract the cable.
5.
Remove the screw and grounding washer (B) on the right side of the frame.
Note: Be careful not to lose the grounding washer.
6.
Disconnect the thermistor cables (C).
7.
Disconnect the exit deflector from the fuser shaft. See
flag removal" on page
Note: You do not have to remove grounding screw or the bin-full/narrow media sensor flag.
for the part number.
"Right cover assembly removal" on page
"Left cover assembly removal" on page
4-27.
4-6.
"Exit deflector and bin-full/narrow media sensor
Repair information
5025-2xx, 4xx
4-12.
4-33