Bin-Full/Narrow Media Sensor Removal - Lexmark C540n Service Manual

5025-2xx, 4xx

Bin-full/narrow media sensor removal

See "Photo sensor" on
1.
Open the front cover.
2.
Remove the cable from the retainer.
Note: Be sure to note the routing for re-installation.
3.
Disconnect the cable from the bin-full/narrow media sensor.
4.
If there is a sensor retaining plate (A) on the side the latches connect, remove the old adhesive plate.
5.
Gently remove the sensor (B) from the bracket by pressing the latches.
4-18
Service Manual
page 7-7 for the part number.