Table of Contents
Advertisement
BT Freelance XC 100/100 Twin ~ Edition 1.1 ~ 8th August '02 ~ 4828
Using the BT Freelance XC
100 Twin additional handset
The BT Freelance XC 100 is NOT GAP compatible,
therefore, it cannot be registered to any other DECT
telephones. However, if you have purchased the BT
Freelance XC 100 Twin you will have the BT Freelance XC
100 additional handset. Please note that this is the only
handset that can be used with the main BT Freelance XC
100 base. With the BT Freelance XC 100 Twin you can
make internal calls and transfer external calls between the
two BT Freelance XC 100 handsets.
The BT Freelance XC 100 additional handset comes
pre-registered to the main BT Freelance XC 100 base.
It is supplied with its own charger and must be charged
continuously for 16 hours before you can use it. Please
see Setting Up on pages 15 and 16 if you have not already
done this.
Internal calls
You can make internal calls between your BT Freelance XC
100 Twin handsets.
To make an internal call
Press the INT button.
Int.
The other BT Freelance XC 100 handset will ring
and INT will be shown on the display to indicate
that the call is internal. To answer the call they
should press the TALK button.
To end the call, press the TALK button.
27
Advertisement
Table of Contents
