Using Bt Freelance Xh 2100 Additional Handsets And Bases - BT FREELANCE XH 2100 User Manual

Using BT Freelance XH 2100
additional handsets and bases
Up to 5 handsets can be registered and
operated from any one BT Freelance
XH 2100 base. This allows you to make
internal calls between two handsets
while a third is making an external call.
HANDSET 1
HANDSET 1
Each handset can be registered to up
to 4 bases.
Each additional handset you purchase
must be registered to the base.
If you have purchased a multiple pack
the handsets are already pre-registered
to the base supplied (
30
HANDSET 1
HANDSET 1
HANDSET 1
).
Remember to charge the battery pack
of new handsets for at least 16 hours
before use.
If the display shows NOT REG and
the symbol is flashing, your
handset is not yet registered with
the base.
At the base:
Press and hold the base
button for at least 10 seconds,
until you hear the validation
tone (two beeps), then release
the button.
At the handset:
Press the
the menu.
Use the
scroll to REGISTER and press
the button.
The display will show
BS 1 2 3 4. (The numbers
that are flashing indicate
button to enter
button to