Cleaning
Cleaning
A dirty Exposure Glass or Document Feeder Belt may have an effect on the quality of your
copies. Inspect them and clean as necessary.
Cleaning the Machine
Wipe the copier with a soft, damp cloth and then dry it.
Cleaning the Exposure Glass
Clean the Exposure Glass using a clean dry
cloth.
Cleaning the Document Feeder
Clean the Document Feeder Belt using a dry
clean cloth.
8 - 14
Note: Do not use chemical cleaner or organic solvent, such as thinner or benzene.
If they get into the copier of melt plastic parts, a failure might occur.
Do not clean parts other than those specified in this Operator Guide. Such parts
should be cleaned by your service representative.
Service and Supplies