Sennheiser Evolution EW100 Instruction Manual page 15

Hide thumbs Also See for Evolution EW100:
Table of Contents

Advertisement

Signal and battery status indication
The yellow LED
at the top of the SK 100 transmitter lights up if the
audio signal at the AF input is excessively high (AF peak).
The red LED
provides information on the battery status:
LED lit up:
The transmitter is switched on and the battery capacity is sufficient.
LED flashing:
The battery is going flat! You should immediately replace the battery.
Attachment of the transmitter to clothing
The SK 100 transmitter is best attached to e.g. the belt with clip
.
The clip is detachable so that you can also attach the transmitter with the
antenna pointing downwards. To do so, withdraw the clip from its fixing
points and attach it the other way round.
Attachment of the microphones
The microphone clips
enable the attachment of the ME 2 and ME 4 clip-
on microphones to clothing (e.g. tie, lapel).
The ME 3 headmic is adjustable to comfortably and securely fit your head.
Positioning the microphones
The ME 3 and ME 4 microphones are directional microphones, i.e. their
sound inlet should always be directed towards the sound source (e.g. mouth).
The ME 2 with omni-directional pick-up pattern picks up sound equally
from all directions. It is the best choice if movements of the speaker's head
have to be compensated for.
59

Advertisement

Table of Contents
loading

Table of Contents