Horizon Fitness T50 User Manual page 9

ASS E M B LY ST EP 2
HARDWARE BAG 1 CONTENTS :
�������
�����
������
���������
��������
* Be sure to tighten bolts after all are lined up.
ASS E M B LY ST EP 3
��������
�����
������
��������
�����
������
�������
���������������
�������������
�������
A Open HARDWARE BAG 2.
B With the running deck in the
lowered position, pull CONSOLE
CABLE through right side
handlebar and pull PULSE
GRIP WIRES through both
handlebars.
C Slide handlebar into the top
holes of the upright masts.
D Place 2 BOLTS (B) into OUTSIDE
of upright MASTS and tighten
with NUT (C).
E Gently place CONSOLE on top of
handlebars. Connect CONSOLE
CABLE and PULSE GRIP WIRES
carefully tucking wires in masts
to avoid damage.
NOTE: Do not pinch console
cable or grip pulse wires.
F Place 4 BOLTS (D) into INSIDE
of upright MASTS and tighten.
Connect power plug to the
treadmill and connect the cord to
a power outlet. The on/off switch
is located next to the power
cord. Flip this switch to the 'on'
position, so that the switch is
lit. You will hear a beep and the
console will light up.
Y O U 'R E FI N IS H E D !
9