MQROCK1/MQRSP1 Setup for Models MQHBZDV4736
STEP 5: Place rocks #3 into position as shown. Do not place
rocks directly onto the burner tubes.
STEP 7: Place rocks #6 into position as shown.
Finished Rock F1 Setup
Never place any of the rocks directly onto the burner tubes.
STEP 6: Place rocks #4 into position as shown.
STEP 8: Place remaining rocks #4 and #6 into position as
shown.
Note: If flame impingement on the rocks causes sooting,
you may have to move or remove one or more rocks. Do
not place rocks directly over top of the burner tube.
43