MQROCK1/MQRSP2 Setup for Models MQHBZDV3636/MQHBZDV4236
WARNING: Failure to position the
parts in accordance with these diagrams or
failure to use only parts specifically
approved with this appliance may result in
property damage or personal injury.
STEP 1: Remove the log holder mount, log supports, and
the grate bar.
STEP 3: Using the platform mount access holes, attach
the rock platform as shown.
PARTS LIST
STEP 2: Attach the back rock support with the 4 screws
as shown. Replace/reinstall the 2 screws from the grate
bar.
Glass or Silicon Sand
Lava Rock Shown
STEP 4: Fill around the rock platform with lava rock. Do
not place any lava rock on the burner. Sprinkle vermiculite
over top of the lava rock.
51