Brick Installation - Mqhbzdv3636/4236/4736 - Marquis MQHBZDV3636 Instruction Manual

Brick Installation - For Models MQHBZDV3636/MQHBZDV4236/MQHBZDV4736
INSTALLING BRICK PANELS FOR MODEL MQHBZDV3636/MQHBZDV4236/MQHBZDV4736
1. Remove door glass from the unit by unlatching the 2 latches on top of unit.
2. (MQHBZDV4736 ONLY)
Using a 1/4" nut driver remove two screws from Brick Panel Filler (#1) and discard brick panel filler. (Ref.1)
3. Remove back Log Holder (#2) by removing three screws from face of Log Holder. The Log Holder will have to be re-
installed after the placement of Back Brick Panel. (Ref.1)
4. (MQHBZDV4736 ONLY)
Place optional front bridge ledge (#3) in the area front of false bottom.
5. Place rear Brick Panel (#4) up against the rear of Firebox by tilting top of panel towards you and sliding bottom of
Panel over the back of burner system.
6. Loosen screws holding brick clip in position. Rotate clip up out of the way and slide side brick (#5) up against rear
Brick. Side brick must be flush with side wall of Firebox. Rotate clip down over Brick Panel and tighten screw.
NOTE: Side Brick for MQHBZDV3636 & MQHBZDV4236
Top of side brick has to be tilted forward and hooked over bottom front lip of Firebox first then rotated backward into position.
7. Re-install Log Holder removed in Step 3.
8. Install log set as per instruction and re-install door.
30