Installation; Audio Connections; Specifications - Behringer X V-AMP User Manual

X V-AMP

8. INSTALLATION

8.1 Audio connections

The input of your BEHRINGER X V-AMP is a mono 1/4" TS
connector. The line out/headphone output comes as 1/4" TRS
stereo connector. The line output works with both balanced and
unbalanced connections.
Fig. 8.1: 1/4" TS connector
Fig. 8.2: 1/4" TRS connector
Fig. 8.3: Headphones connector
12

9. SPECIFICATIONS

Type
Input impedance
Max. input level
Type
Output impedance
Max. output level
Type
Output impedance
Max. output level
Converter
Dynamics A/D
Dynamics D/A
Sample rate
DSP
Delay time
Run time
(Line In Line Out)
Type
Mains voltage
Power consumption
Mains connection
Dimensions (H x W x D) approx. 70 mm (2 3/4") x 235 mm (9 1/4")
Weight
Shipping weight
BEHRINGER constantly strives to maintain the highest quality standards. Modifications
may be made, if necessary, without prior notice. The specifications and appearance of the
equipment may therefore differ from those listed or illustrated.
9. SPECIFICATIONS
1/4" TS connector, unbalanced
approx. 1 MW
+5 dBu
1/4" TRS stereo connector, balanced
approx. 50 W
+13 dBu @ 10 kW / +18 dBm @ 100 W
1/4" TS connector, unbalanced
approx. 100 W
-7 dBu
24-bit Delta-Sigma, 64/128-times
oversampling
100 dB @ preamp bypass
95 dB
31.250 kHz
100 Mips
max. 1960 ms stereo
approx. 5 ms
2-digit, 7-segment LED display
USA/Canada 120 V~, 60 Hz
U.K./Australia 240 V~, 50 Hz
China/Korea 220 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
max. 7 W
external power supply (2-pole)
x 175 mm (6 7/8")
approx. 0.75 kg (1.65 lbs)
approx. 1.75 kg (3.85 lbs)