Dometic RH330LD Service Instruction page 15

9. Unscrew the two
feet.
D
13. Mount the terminal strip (D) on the rear side
of the miniBar (Prick two holes in the rear wall
for mounting the terminal strip).
14. Lead the sensor-cable to the terminal strip and
fix the cable with scotch tape.
16. Take the last plain-
washer and put it
on the lower hinge
pin.
F
10. Take two plain
washers (F) und put
the washers under
the feet.
Mount the feet
back on place.
17. Mount the door
back on place
(follow point 2 and
3 backwards).
11. Drill a hole for the
sensor, ø3mm,
depth 5mm.
centred
15. Connect the Sensor-cable to the terminal strip.
15
E
C
12. Fix the sensor (E) with
clip (C), leveled with the
housing.
10 mm
Ø 3 mm
13,5 mm
1= terminal strip
2= approximation switch
A= blue (opening mechanism)
B= black (closing mechanism)
C= white