Dometic RH330LD Service Instruction page 12

11.1.1 Change of the Mechanical ADC
( for RH356 / RH456 LD E)
The complete component is not screwed in the doorframe but inserted. So without
removal of the door or loosing of screwings the ADC-component can be exchan-
ged.
......and pull out the complete ADC.
ADC - component, complete
Press in the mounting
pins and pull out the
component a little bit.
Press in the mounting pins on
the other side as well by
means of a screw driver.....
12
Pin
(triggers a weight when ope-
ning the door )