Accessing Embedded Web Server Rx - Utax 3060i3560i User Manual

Installing and Setting up the Machine > Embedded Web Server RX

Accessing Embedded Web Server RX

1
2
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Examples: https://192.168.48.21/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Embedded Web Server RX
as well as their current status.
NOTE
If the screen "There is a problem with this website's security certificate." is displayed,
configure the certificate. For details on Certificates, refer to the Embedded Web Server RX
User Guide.
You can also continue the operation without configuring the certificate.
Configure the function.
Select a category from the navigation bar on the left of the screen. When you log in to the
machine as an administrator, you will see
[Network Settings], [Security
[Device Settings],
Settings], and [Management
2-40
[Function Settings],
Settings].