Utax 3060i3560i User Manual page 154

Preparation before Use > Registering Destinations in the Address Book
The Folder (FTP) Address
Press [Change] of "Host Name", "Path", "Login User Name" and "Login Password", enter the
information for each item and press [OK].
The table below explains the items to be entered.
Item
Host Name* Host name or IP address of FTP server
Path Path for the file to be stored
For example, "User\ScanData".
If no path is entered, the file is stored in the home
directory.
Login User Name FTP server login user name
Login Password FTP server login password
* If you specify a port number other than the default (21), use the "Host name: port number"
(Example: FTPhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
NOTE
• Refer to the Character Entry Method on page 11-9
• Press [Connection Test] to check the connection to the FTP server you chose. If the
connection fails, check the entries you made.
2
Check if the destination entry is correct and press [Save]. The destination is added to the
Address Book.
To register the registered address in a one-touch key, press [Yes] in the pop-up screen that appears
after [Save] is pressed.
NOTE
To register a new One Touch Key, refer to
Touch Key) on page 3-48.
Descriptions
for details on entering characters.
Adding a Destination on One Touch Key (One
3-44
Max. No. of
Characters
Up to
64 characters
Up to
128 characters
Up to
64 characters
Up to
64 characters