Finish The Installation - Utax 3060i3560i User Manual

Installing and Setting up the Machine > Installing Software
3
4
Install using [Express
1
2
3
You can also select [Use host name for port name] and set to use the host name of the
standard TCP/IP port. (A USB connection cannot be used.)
NOTE
The machine cannot be detected unless it is on. If the computer fails to detect the machine,
verify that it is connected to the computer via a network or USB cable and that it is turned on
and click (Reload).
If the Windows security window appears, click

Finish the installation.

When "Your software is ready to
page, click the "Print a test
Click [Finish] to exit the wizard.
NOTE
When you have selected
will appear after [Finish] is clicked. Configure the settings for options installed on the
machine. Device settings can be configured after the installation is completed. For details,
refer to the Device Settings in the Printing System Driver User Guide on the DVD.
If a system restart message appears, restart the computer by following the screen prompts.
This completes the printer driver installation procedure.
The TWAIN driver can be installed if the machine and computer are connected via a network.
If you are installing the TWAIN driver, continue by configuring the
2-22).
Install].
Packages include the following software:
• Driver Package
Printing System Driver, Fonts
• Scan Package
TWAIN Driver
4
[Install this driver software
use" appears, you can use the software. To print a test
page" checkbox and select the machine.
[Device settings] in Windows XP, the dialog box for device setting
2-15
anyway].
Setting TWAIN Driver (page