Utax 3060i3560i User Manual page 457

Troubleshooting > Troubleshooting
S
Message
Scanner memory is full.
*
Send Error.
Skewed originals fed.
Staple is empty. (Manual
Staple)
Staple is empty.
Staple jam.
System error.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
T
Message
The cover is open.
The password does not
meet password policy.
Checkpoints
*
—
—
―
Has staple cartridge holder A run
out of staples?
*
Has the staple cartridge holder run
out of staples?
—
—
Checkpoints
Is there any cover which is open?
Is the password expired?
Is the password policy requirement
(such as password length or
required characters) changed?
Corrective Actions
Scanning cannot be performed due
to insufficient memory of the
scanner. Follow the instructions on
the screen.
An error has occurred during
transmission. The job is canceled.
Press [End]. Refer to Responding to
Send Error for the error code and
corrective actions.
See the caution attached on the
document processor and check the
originals. If the originals are
jammed, follow the instructions on
the screen to remove the originals.
Add staples to staple cartridge
holder A.
If the staples are depleted, the
machine will stop and the location of
staple depletion will be indicated on
the screen. Leave the machine on
and follow the instructions to
replace the staple case. Press
[Continue] to print without stapling.
Press [Cancel] to cancel the job.
If a staple jam occurs, the machine
will stop and the location of the jam
will be indicated on the screen.
Leave the machine on and follow
the instructions to remove the
jammed staple.
System error has occurred. Follow
the instructions on the screen.
Corrective Actions
Close the cover indicated on the
screen.
Change the login password.
The job is canceled. Press [End].
Confirm the password policy
requirements and change the login
password.
The job is canceled. Press [End].
10-27
Reference
Page
—
page 10-30
―
page 10-12
page 10-11
page 10-52
—
Reference
Page
―
page 9-7
page 9-8
page 9-7
page 9-8