Battery Recharge - Panasonic KX-TG2711E Operating Instructions Manual

Digital cordless phone & digital cordless answering system
Hide thumbs Also See for KX-TG2711E:
Table of Contents

Advertisement

Useful Information
Problem
I cannot hear a dial tone.
I cannot use the intercom
or phonebook copy feature.
Programmable settings
Problem
The display is in a
language I cannot read.
I cannot activate the eco
mode.
I cannot remember the
PIN.

Battery recharge

Problem
The handset beeps and/or
flashes.
I fully charged the
batteries, but
still flashes or
– the operating time
seems to be shorter.
36
Cause/solution
R Make sure that you are using the supplied telephone line cord.
Your old telephone line cord may have a different wiring
configuration.
R The base unit's AC adaptor or telephone line cord is not
connected. Check the connections.
R Disconnect the base unit from the telephone line and connect
the line to a known working telephone. If the working
telephone operates properly, contact our service personnel to
have the unit repaired. If the working telephone does not
operate properly, contact your service provider/telephone
company.
R These features are available between the handsets. Although
the handset displays "Intercom", "Copy All", or "Copy",
these features are not available for single handset models.
Cause/solution
R Change the display language (page 15).
R You cannot set eco mode when you set the repeater mode
"On". If required, set the repeater mode to "Off" (page 22).
R Change the PIN using the following method.
1
M
2
MbN: "Base Unit Setup" a M
3
MbN: "Base Unit PIN" a M
4
*7000
5
Enter the new 4-digit base unit PIN. a M
M
Cause/solution
R Battery charge is low. Fully charge the batteries (page 11).
R Clean the battery ends (
a dry cloth and charge again.
R It is time to replace the batteries (page 11).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
N
N
,
) and the charge contacts with
N
N
N a

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents