Firestones or Fireglass Installation
If your fireplace has already been in operation, disconnect the gas
and electrical supply, remove the door and safety barrier.
1). Open your 9lbs of glass media purchased from your Montigo
Dealer. You only need 8lbs - separate out approxmiately 1lb.
Figure 84 Sec.4
2). Do not drop any glass media into the pilot. To help reduce this
when installing the glass media, place a piece of tape over the
pilot opening. Remove tape when media installation is complete
and before operating the unit.
Figure 85 Sec.4
XG0514-150204
Installation
Figure 86 Sec.4
3). Evenly distribute the glass media around the burner tray. Make
sure there is only one layer of glass media covering the burner ports.
Figure 87 Sec.4
4). If you have used tape to cover the pilot opening, remove it now.
Figure 88 Sec.4
Figure 89 Sec.4
Completed firestone installation
I-Series Indoor Gas Fireplace
Page 31