Remote Operation; Mode Key - Montigo 34FIDN-L-F Installation & Maintenance Manual

I-series indoor residential fireplace insert
Hide thumbs Also See for 34FIDN-L-F:
Table of Contents

Advertisement

Remote Operation

The Proflame 2 System consists of the following elements:
1. Pilot Assembly
2. Proflame Gas Valve.
3. Proflame 2 Control Module
4. Wiring Harness
5. Variable Speed fans
6. Variable Accent Lights
7. Proflame 2 remote control
8. Battery Pack
9 Manual override switch
NOTE: Can not be used with home automation systems.
The Proflame 2 Transmitter controls the following fireplace
functions:
1. Main Burner On/Off
2. Main Burner flame modulation (6 levels).
3. Choice of standing or intermittent pilot (CPI/IPI).
4. Thermostat and Smart thermostat functions.
5. Variable Accent light (6 Levels).
6. Fan speed modulation (6 levels).
The Proflame 2 Transmitter uses a streamlined design with a
simple button layout and informative LCD display, see Figure
8 Sec 5. A Mode Key is provided to index between the features
and a Thermostat Key is used to turn On/Off or index through
Thermostat functions, see Figure 10 Sec.5. Additionally, a Key
Lock feature is provided.
WARNING
Do not expose remote control to temperatures below 0°C (32°F) or above 50°C (122°F)
CAUTION
Property Damage Hazard. Excessive heat can cause property damage.
The appliance can stay lit for many hours. Turn off the appliance if it is not going
be attended for any length of time.
XG0514-150204
Operation
.
.
Figure 8 Sec.5
Proflame 2 Remote Control
SW1
LED1
LED2
SW1 = Programing Button
LED1 = Red Diagnostic Light
LED2 = Amber Programing Remote Control Light
Figure 9 Sec.5
Proflame 2 Control Module
Fans
Figure 10 Sec.5
Remote Control LCD display.
I-Series Indoor Gas Fireplace
Blue Back lit LCD display
On/Off Key
Thermostat Key
Up/Down Arrow Key

Mode Key

Not Used
Accent lights
Page 39

Advertisement

Table of Contents
loading

This manual is also suitable for:

34fidl-l-f

Table of Contents