Listening To Fm/Am Radio; Setting The Frequency Steps; Selecting A Frequency For Reception - Yamaha RX-V671 Owner's Manual

CODE SET CODE SET
RECEIVER RECEIVER
HDMI HDMI
1 1 2 2 3 3 4 4
5 5 V-AUX V-AUX
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 AUDIO AUDIO DOCK DOCK
TUNER
TUNER PHONO PHONO NET NET USB USB
FM AM TUNING
PRESET PRESET TUNING
INFO INFO MEMORY MEMORY
SUR. DECODE STRAIGHT SUR. DECODE STRAIGHT
FM
MOVIE MOVIE MUSIC MUSIC
AM
SLEEP SLEEP ENHANCER ENHANCER PURE DIRECT PURE DIRECT
SCENE SCENE
CD CD RADIO RADIO
OPTION OPTION
VOLUME VOLUME
DISPLAY DISPLAY
POP-UP POP-UP
MUTE MUTE
MENU MENU
MODE
MODE
1 2 3 4
Numeric keys
5 6 7 8
ENT
9 0 10 ENT
TV TV
INPUT INPUT
TV VOL TV VOL TV CH TV CH

Listening to FM/AM radio

You can tune into a radio station by specifying its frequency or
selecting from registered radio stations.
• The radio frequencies differ depending on the country or region where the unit is
being used. The explanation of this section uses a display with frequencies used
in U.K. and Europe models.
• If you cannot have a good reception on the radio, adjust the direction of the FM/
AM antennas.

Setting the frequency steps

(Asia and General models only)
At the factory, the frequency step setting is set to 50 kHz for FM and
9 kHz for AM. Depending on your listening environment, set the
frequency steps to 100 kHz for FM and 10 kHz for AM.
1
Set this unit to standby mode.
2
When holding down STARIGHT on the front panel,
press MAIN ZONE .
MAIN ZONE
PROGRAM STRAIGHT
3
Press PROGRAM repeatedly to select "TU".
PRESET
STEREO
TUNED
TU - FM50/AM9
4
Press STARAIGHT to select "FM100/AM10".
5
Press MAIN ZONE to set this unit to standby
mode and turn it on again.

Selecting a frequency for reception

1
2
3
VOL.
SW
C
L R
SL SR
SBL SBR
Press TUNER to select "TUNER" as the input
source.
Press FM or AM to select a band.
VOL.
FM 87.50MHz
Use the following keys to set a frequency.
TUNING: Increase/decrease the frequency.
Hold down the key for about a second to search the station
automatically.
Numeric keys: Enter a frequency directly. For example, to
select 98.50 MHz, press "9", "8", "5" and "0" (or ENT).
VOL.
STEREO
TUNED
FM 98.50MHz
"TUNED" lights up when a signal is received from a radio
station.
"STEREO" also lights up when a stereo signal is received.
• "Wrong Station!" appears when you enter a frequency that is out of
receivable range
• You can switch between stereo and monaural for FM radio reception by
pressing MODE. When signal reception for FM radio station is unstable,
switching to monaural may improve it.
SW
C
L R
SL SR
SBL SBR
SW
C
L R
SL SR
SBL SBR
47
En