Setting The Remote Control Codes For Playback Devices - Yamaha RX-V671 Owner's Manual

SOURCE
MAIN MAIN ZONE 2 ZONE 2
CODE SET
CODE SET
SOURCE RECEIVER
SOURCE/RECEIVER
HDMI
1 2 3 4
5 V-AUX
AV
Input selection key
1 2 3 4
5 6 AUDIO DOCK
TUNER PHONO NET USB
FM FM AM AM
PRESET PRESET TUNING TUNING
INFO INFO MEMORY MEMORY
SUR. DECODE STRAIGHT SUR. DECODE STRAIGHT
MOVIE MOVIE MUSIC MUSIC
SLEEP SLEEP ENHANCER ENHANCER PURE DIRECT PURE DIRECT
SCENE SCENE
BD BD
TV TV CD CD RADIO RADIO
DVD DVD
ON SCREEN ON SCREEN OPTION OPTION
Menu operation keys
ENTER VOLUME VOLUME
RETURN DISPLAY
DISPLAY
TOP POP-UP
MUTE MUTE
MENU MENU
External device
MODE MODE
operation keys
1 2 3 4
Numeric keys
5 6 7 8
9 0 10 ENT
TV
INPUT
TV operation keys
TV VOL TV CH
MUTE
Setting the remote control codes for
playback devices
By setting the remote control codes for your playback devices, you
can operate those devices with the remote control of this unit. Since
the codes are assigned to each input source key, you can select
the input source and device to control with the remote control
concurrently.
• At the factory, Yamaha CD player code (5095) is set for AV3. For the other input
selection keys, no codes are set.
1
Use "Remote Control Code Search" in the CD-ROM
to find a remote control code for your playback
device.
• If multiple remote control codes exist, first set the first code in the list, if it
does not work then try the other codes.
2
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. In this case, repeat
from step 2.
3
Press a corresponding input selection key.
For example, press HDMI1 to set the remote control code
for the playback device connected to the HDMI1 jack.
4
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is registered successfully,
SOURCE/RECEIVER blinks twice.
If it blinks 6 times, registration failed. Repeat from step 2.
• For details on how to register the input selection key applied the remote
control code on a corresponding SCENE key, refer to "Configuring scene
assignments" (p.41).
■
Playback device operations
Once you have registered the remote control code for your
playback device, you can control it using the following keys after
selecting the input source or scene.
• By pressing SOURCE/RECEIVER, you can switch the devices (this unit or
external device) to operate with the menu operation keys, DISPLAY and numeric
keys. You can operate this unit when SOURCE/RECEIVER lights up in orange,
and an external device when SOURCE/RECEIVER lights up in green.
For example, if you register the remote control code of your external device on
TUNER, you can operate FM/AM radio built in this unit when SOURCE/
RECEIVER lights up in orange, and the external device when SOURCE/
RECEIVER lights up in green.
SOURCE Turns on/off the playback device.
Cursor keys Select an item.
Menu operation
ENTER Confirms a selected item.
keys
RETURN Returns to the previous screen.
DISPLAY Switches information on the display.
TOP MENU Displays the top menu.
POP-UP MENU Displays the pop-up menu.
Stops playback.
Stops playback temporarily.
External device Starts playback of the selected song/
operation keys video.
Search forward/backward (by holding
down).
Skip forward/backward.
Numeric keys Enter numerical values.
TV operation keys Control the TV (p.103).
• These keys work only when the corresponding function is available on your
playback device and is possible to be operated with an infrared remote control.
104
En