Yamaha RX-V671 Owner's Manual page 24

1 2 3 4 5 6 7 8 9 10
TV connection
3
Configure the settings for HDMI Control.
a Enable HDMI Control on the TV and playback devices (HDMI Control-compatible BD/
DVD player, etc).
b Turn off the main power of the TV and then turn off this unit and playback devices.
c Turn on the main power of the TV and then turn on this unit and playback devices.
d Switch the TV input to display the video from this unit.
e Turn on the playback device and check the followings.
On this unit: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV: The video from the playback device is displayed.
f Check that this unit is properly synchronized with the TV by turning on/off the TV or
adjusting the TV volume with the TV remote control.
Now the necessary settings are complete.
If you select a TV program with the TV remote control, the input source of this unit will
be automatically switched to "AV4" and the TV audio will be played back on this unit.
• If HDMI Control does not work properly, try turning off and on (or unplugging and re-plugging) the
devices. It may solve the problem.
• "AV4" is set as TV audio input at the factory. If you have connected any external device to the AV4
jacks or if you want to use another input jack (other than OPTICAL) for connecting the TV, use "TV
Audio Input" (p.93) in the "Setup" menu to change the TV audio input assignment. To use the SCENE
function (p.41), you also need to change the input assignment for SCENE(TV).
■
Connection method 3 (TV with HDMI input jacks)
Connect the TV to this unit with an HDMI cable and a digital optical cable.
HDMI OUT jack
HDMI OUT
This unit
(rear)
ARC
HDMI
DOCK NETWORK
HDMI OUT
ARC
PHONO ANTENNA
COMPONENT
VIDEO
L
AM FM
P R
R S VIDEO
GND
P 75Ω
B
VIDEO
Y
L
R
O
OPTICAL COAXIAL COAXIAL OPTICAL
AV
OPTICAL
(CD) (TV)
OUT
AV 1 AV 2 AV 3 AV 4 AV 5 AV 6 AUDIO
(TV)
AV 4
AV4 (OPTICAL) jack
If switch the input source of this unit to "AV4" by pressing AV4 or SCENE(TV), the TV
audio will be played back on this unit.
• If you make an HDMI connection between your TV and this unit, any videos input to this unit can be output
to the TV no matter how you connect video devices to this unit. For details, see "Video signal flow" (p.118).
• If you have connected any external device to the AV4 jacks or if you want to use another input jack (other
than OPTICAL) for connecting the TV, connect the TV to one of the AV1~6 and AUDIO1~2 jacks. To use
the SCENE function (p.41), you also need to change the input assignment for SCENE(TV).
HDMI input
HDMI
HDMI
OPTICAL
O
TV
Audio output
(digital optical)
24
En