Printing A Self-Test; Setting Top Of Form - Datamax RP Series User Manual

RP SERIES OF PRINTERS USER'S GUIDE

Printing a Self-Test

1. Press and hold Button 1. After printing begins,
release Button 1 (Figure 29).

Setting Top of Form

1. Press Button 1 to turn on the printer.
2. Position the paper by pressing Button 1 until the end
of the paper aligns with "TOP OF FORM" imprinted
on the edge of the printer's case (Figure 28). If
necessary, press Button 2 to back feed the paper.
3. Turn the printer off by pressing buttons 1 and 2
simultaneously (Figure 29).
4. Press Button 1 to turn on the printer. The top of form
is automatically set.
Figure 28
TOP
OF
FORM
Figure 29
15
Button 2
Button 1