Changing Display Mode; Maintenance & Care - La Crosse Technology Radio Controlled Projection Alarm WT-5600 Instruction Manual

F. CHANGING DISPLAY MODE (DAY, SECONDS, AND ALARM TIME)
There is three possible display modes to view the date, seconds and alarm time.
To change the display (starting at the default of month - date):
1. Press the "MODE/+" button and the display will now show seconds.
2. Press the "MODE/+" button and the display will now show alarm time.
3. Press the "MODE/+" button and the display will now show month – date.
MAINTENANCE & CARE
B. Extreme temperatures, vibrations and shock should be avoided to prevent
damage to the units.
C. Clean displays and units with a soft, damp cloth. Do not use solvents or
scouring agents—they may mark and damage the displays and casings.
D. Do not submerge in water.
E. Immediately remove all low powered batteries to avoid leakage and damage.
F. Replace with new batteries only and of recommended size.
G. Opening the casings invalidates the warranty. Do not try to repair the units.
Contact La Crosse Technology for repairs.
12