JETWAY G03-NMF93-F User Manual page 30

XHCI Streams
The optional settings are: [Disabled]; [Enabled].Use this item to enable or disable
XHCI Maximum Primary Stream Array Size.
*Note: The above item shall not appear when XHCI Mode is set as [Disabled].
EHCI1/ EHCI2
Use this item to enable or disable USB EHCI (USB 2.0) support. One EHCI
controller must always be enabled. The optional settings are: [Enabled];
[Disabled].
USB Port Pre-Port Disable Control
Use this item to control each of the USB ports (0~13) disabling.
► PE2 Configuration/ PE3 Configuration/Mini PCIE Slot Configuration
Press [Enter] to make settings for PE2/PE3/ Mini PCIE slot configuration.
PE2 Slot/ PE3 Slot/Mini PCIE Slot
Use this item to control corresponding PCI Express Root Port.
ASPM Support
Use this item to set the ASPM level. The optional settings are: [Disabled]; [L0s];
[L1]; [L0SL1]; [Auto].
URR
Use this item to enable or disable PCI Express unsupported request reporting.
FER
Use this item to enable or disable PCI Express device Fatal Error Reporting.
NFER
Use this item to enable or disable PCI Express device Non-Fatal Error Reporting.
CER
Use this item to enable or disable PCI Express device Correctable Error
Reporting.
CT0
Use this item to enable or disable PCI Express Completion Timer T0.
SEFE
Use this item to enable or disable Root PCI Express System Error on Fatal Error.
SENFE
Use this item to enable or disable Root PCI Express System Error on Non-Fatal
Error.
SECE
Use this item to enable or disable Root PCI Express System Error on Correctable
Error.
PME SCI
Use this item to enable or disable PCI Express PME SCI.
Hot Plug
Use this item to enable or disable PCI Express Hot Plug.
PCIe Speed
Use this item to select PCI Express port speed.
Extra Bus Reserved
Use this item to set extra bus reserved (0-7) for bridges behind this root bridge.
Reserved Memory
Use this item to set reserved memory and prefetchable memory (1-20MB) range
for this root bridge.
26