Table of Contents
Advertisement
6215 Equinox 1200 UG
Additional handsets and bases
Expanding your system is easy.
Up to five handsets can be registered and operated from
the BT Equinox 1200.
You can make internal calls between two handsets while
third is making an external call.
Each handset can be registered on up to four bases.
If you buy new handsets to use with your BT Equinox
1200 they will have to be registered to the base before
you can use them.
Register a new BT Equinox handset
1. Press MENU, then scroll down to
press OK.
2.
Register Handset
3. If you have more than one base, scroll
the base. Press OK.
4. Enter the base's SYSTEM PIN (original setting 0000).
Press OK.
9/6/04
11:27 am
BT Equinox 1200 – Edition 6 – 28.05.04 – 5757
Registration
is highlighted. Press OK.
or
Page 65
You can create phonebook entries
and adjust some handset settings
such as ringer melody and volume
on an unregistered handset or out
of range handset.
IMPORTANT
Before registration, make sure the
handset batteries are fully charged
and that you are close to the base.
and
to select
65
Advertisement
Table of Contents
