BT EQUINOX 1200 User Manual page 69

6215 Equinox 1200 UG
Problems
You cannot link up
with the base
No ring on the handset
Buzzing noise on my
radio, TV, computer
or hearing aid
The charging does not
appear to be working
9/6/04 11:27 am Page 69
BT Equinox 1200 – Edition 6 – 28.05.04 – 5757
Possible cause
Is the display flashing
connected to the mains power and switched on.
Are you are out of range? Move the handset closer to
the base.
Are the batteries low or flat? If so, charge the batteries
or replace them if necessary.
If using more than one base, check that you are connected
to the correct base, see page 67.
Check that the ringer volume is switched on, see page 52.
Check that the base is plugged into the phone socket
and that it is also connected to the mains power and
switched on.
Sometimes, your BT Equinox 1200 and other DECT GAP
compatible handsets can interfere with other electrical
equipment if placed too close. Try moving it at least one
metre away from such appliances.
Check that the base is plugged into the mains socket
and switched on.
? Check that the base is
Help 69