Honda CBR500R Manual page 67

Engine Oil u Changing Engine Oil & Filter
Rubber
seal
7. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8. Install a new oil filter and tighten.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
64
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
10. Fill the crankcase with the recommended
oil (
Required oil
When changing oil &
engine oil filter:
2.7 litres (2.9 US qt, 2.4 Imp qt)
Oil filter
When changing oil only:
2.5 litres (2.6 US qt, 2.2 Imp qt)
11. Check the oil level.
12. Check that there are no oil leaks.
http://mototh.com
P. 48) and install the oil fill cap.
2
P. 61
2