Removing & Installing Body Components
Battery
Rubber
strap
Battery
60
u
Battery
❙
Make sure the ignition switch is off.
1. Remove the front seat.
Positive
2. Unhook the rubber strap from rear side.
terminal
3. Disconnect the negative
Negative
terminal
4. Disconnect the positive
5. Remove the battery taking care not to
❙
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
Readjust the clock after the battery is
reconnected since the clock goes wrong
once the battery disconnected.
The tripmeter A and B will be reset if the
battery is disconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
http://mototh.com
Removal
the battery.
the battery.
drop the terminal nuts.
Installation
P. 57
2
terminal from
-
terminal from
+
+
P. 46
2
P. 94
2