Removing & Installing Body Components; Rear Seat - Honda CBR500R Manual

Removing & Installing Body Components

Rear Seat

Ignition key
Seat lock
56
Prongs Rear seat
Rear stays
http://mototh.com
❙
Removal
1. Insert the ignition key into the seat lock.
2. Turn it clockwise, then pull the rear seat
up and back.
❙
Installation
1. Insert the prongs into the rear stays on the
frame.
2. Push down on the rear of the rear seat.
Make sure that the seat is locked securely
in position to pull it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the rear seat.