Adjusting The Drive Chain Slack - Honda CBR500R Manual

Adjusting the Drive Chain Slack

Adjusting the chain requires special tools.
Have the drive chain slack adjusted by your
dealer.
When adjusting the drive chain slack, be
careful not to damage the wheel speed
sensor and pulser ring.
1. Place your motorcycle on the side stand
on a level surface.
2. Stop the engine. Place the transmission in
Neutral.
3. Loosen the rear axle nut.
4. Loosen the lock nuts on both sides of the
swingarm.
Drive Chain
Adjusting nut
http://mototh.com
u Adjusting the Drive Chain Slack
Lock nut
Rear axle nut
Adjusting nut
Rear edge of
adjusting slot
Chain adjuster
index mark
Lock nut
continued 71