Kyocera Mita FS-C8008DN Operation Manual page 52

MENU Key
The MENU key lets you enter the menu system to change the setup and printing
environment of the printer.
Pressing this key during a menu selection will terminate the selection and return the printer
to the normal operation.
Arrow Keys
The four arrow keys are used in the menu system to access a desired item or enter numeric
values.
The arrow key with the question mark (?) may be pressed when the paper jam message has
appeared on the message display. Then a help message will appear to facilitate jam clearing
in the location.
ENTER Key
This key is used to:
• Finalize settings of numeric values and other selections.
• Set the paper source when Use alternative? is shown in the message display.
If you hold down the ENTER key and press the MENU key when Ready is shown on
this printer, the AdministrationID menu will be displayed. This menu is the setting
menu for administration under the Account Management System and is normally not
Note
used. Press the MENU key to return to the Ready display.
3-7
3.1 Understanding the Operator Panel