Carriage-Return (Cr) Action - Kyocera Ecosys FS-3820N Operation Manual

Carriage-Return (CR) Action

7
When the desired action is displayed, press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
This procedure instructs the printer what to do when it receives a carriage-
return code (character code 0DH)
1
Press the MENU key.
2
Press the or
Page set
3
Press the > key.
4
Press the or
>CR Action
CR only
5
Press the ENTER key. A blinking question mark (?) appears.
>CR Action
? CR only
6
Press the or
appears.
CR only
CR and LF
Ignore CR
7
When the desired action is displayed, press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
key repeatedly until Page set > appears.
>
key repeatedly until >CR Action appears.
key repeatedly until desired carriage-return action
A carriage-return is performed. (default)
A carriage-return and linefeed are performed.
The carriage-return code is ignored.
1-93
Configuration