Paper Type User Setting; Custom Setup - Kyocera DP-3600 Instruction Handbook Manual

Paper type user setting

The following describes the procedure used to set a user-defined paper type for the printer. Eight
custom user settings may be registered. After having been set, any of these may be called up when
setting the paper type for a paper source.
Display Paper handling > on the printer's Mode Select Menu and press the 4 key. Then
1.
use the + and - - - - keys to display >Custom setup.
Paper handling >
Pressing the ENTER key will cause a ? to be displayed. Press the + or - - - - keys to select the paper
2.
type (see page 2-51) that you want to customize and then press the ENTER key.
>Custom setup
? Custom #
Note______________________________________________________________________
Note that if you change the setting for a paper type other than Custom 1 through 8 the paper type
setting for each paper source set to that paper type will be changed.
>Custom setup >
Custom #
Setting the Paper Type
2-53