Print Accumulated Vmb Data With A Password - Kyocera DP-3600 Instruction Handbook Manual

Chapter 2 Operating the Page Printer

Print Accumulated VMB Data with a Password

2-36
Display the VMB data you want to print. Pressing the ENTER key will cause Processing to be
4.
displayed and the data will be printed.
This function prints VMB data protected by a password which has accumulated in a virtual output tray.
Display >Print VMB data Tray. The VMB tray number will appear in the location marked
1.
by #'s below, while the VMB tray name will appear in the location marked by %'s.
>Print VMB data
Tray###:%%%%%%%
Pressing the ENTER key will cause a ? to flash.
2.
>Print VMB data
Tray###?%%%%%%%
Each time the + or – keys are pressed, the VMB data display will change.
3.
Press the CANCEL key if you want to halt printing. The ? display will disappear.
If a password is set for the VMB data you want to print, the message display will change to
4.
>User ID? 00001 and the printer will standby to accept a password. The cursor will blink in
the one's place of the displayed number. Enter the correct password. Use the 3 and 4 keys to
change places and the + or – keys to change the displayed number. Passwords from 00001 to
65535 can be entered.