Bcr (Scanner); Berg (Bar) / Scale / Coin Dispenser / Online; Perpaid Card / Onl Acct Bal; Ic Card - Sharp UP-810F Programming Manual

DEVICE CONFIG - 10. BCR (SCANNER)
DISPLAY
CHANNEL# Channel No.
BAUD RATE Transmission speed
DATA BITS Data bit
PARITY Parity bit
STOP BIT Stop bit
*
ER-A61HS1 setting : "BAUD RATE = 4800 bps" , "DATA BITS = 7Bits", "PARITY = ODD", "STOP BIT = 1Bit"
DEVICE CONFIG - 11. BERG (BAR) / SCALE / COIN DISPENSER / ONLINE
DISPLAY
CHANNEL# Channel No.
DEVICE CONFIG - 12. PERPAID CARD / ONL ACCT BAL
Details are omitted.
DEVICE CONFIG - 13. IC CARD
DISPLAY
CHANNEL# Channel No.
DEVICE CONFIG - 14. POLE DISPLAY
DISPLAY
WAITING TIME Waiting time until message is display-
yed on POLE.
CONTENTS SELECT ITEM
4800 bps
9600 bps
19200 bps
CONTENTS SELECT ITEM
CONTENTS SELECT ITEM
CONTENTS SELECT ITEM
UP-810F/820N/820F (U) SRV MODE PROGRAMMING ("SETTING")
3 – 4
MRS
0 - 4 0 0:
4800 bps
7 Bits 7 Bits
8 Bits
NON ODD
EVEN
ODD
2 Bits 1 Bit
1 Bit
MRS
0 - 4 0 0:
MRS
0 - 4 0 0:
MRS
0 - 999 0 3 digits (0 to 999 seconds)
0 (No display)
NOTE
No RS-232 channel is assigned.
NOTE
No RS-232 channel is assigned.
NOTE
No RS-232 channel is assigned.
NOTE