Installing Grip; Connecting Ground Cable - Mahindra 3016 User Manual

5. 5. Install the R.H. lever guide with four bolts
(M6x16mm,M6x20mm) and a nut (M6).
Tighten the bolts and nut to the following
torque. 4-5Lbf ft (4.9-6.9N m).
In the case of gear specifi cations, connect
the harness of the IND PTO switch.
R.H. LEVER GUIDE R.H. LEVER GUIDE
6. 6.Install the knob.
KNOB KNOB
7.Put 7.Put the label on the R.H. lever guide as
shown in the fi gure below.
R.H. LEVER GUIDE R.H. LEVER GUIDE
LABEL LABEL
2.2 Inch (55mm) 2.2 Inch (55mm)
19

INSTALLING GRIP

1. 1. Install the grip to the Aux. lever and posi-
tion lever.
Apply a quick-drying glue to grips.
GRIP GRIP
POSITION CONTROL POSITION CONTROL
GRIP GRIP
LEVER LEVER
CONNECTING GROUND
CABLE
1.Connect the ground cable to the battery.
GROUND CABLE GROUND CABLE
AUX. LEVER AUX. LEVER
BATTERY BATTERY