Installing Aux. Arm - Mahindra 3016 User Manual

1. Install washer (M16x6mm) and shaft
(M16x25mm) to the hydraulic housing.
Tighten the shaft to the following torque.
112-127Lbf ft (152-172N m)
2. Install collar collar and Aux. arm to the shaft.
AUX. ARM AUX. ARM
SHAFT SHAFT
3.Install liner, conical spring and nuts (M16)
to the shaft.
AUX. ARM AUX. ARM
NUTS(M16) NUTS(M16)
CONICAL SPRING CONICAL SPRING
CONICAL SPRING CONICAL SPRING
NUTS(M16) NUTS(M16)
LINER LINER
APPLY GREASE. APPLY GREASE.

INSTALLING AUX. ARM

COLLAR COLLAR
WASHER WASHER
LINER LINER
WASHER WASHER
COLLAR COLLAR
SHAFT SHAFT
AUX. ARM AUX. ARM
12
4. Tighten the two nuts on the shaft to ad-
just to the following multiplying the fric-
tional force at the Aux. arm.
FRICTIONAL FORCE:1.44-2.16Lbf ft
SHAFT SHAFT
(1.96-2.94N m)
AUX. ARM AUX. ARM
NUTS(M16) NUTS(M16)