Upright Cycle: Adjusting the Seat Tilt
To adjust the seat tilt on an upright cycle, take the following steps.
1. Use a ¹¹⁄₁₆-inch (17 mm) box-end wrench or crescent wrench to
loosen the nut beneath the seat. Refer to Diagram 5.
Diagram 5: Loosen nut to adjust seat tilt
Diagram 6: Tilt the seat forward or backward
Product Owner's Manual: Maintenance
2. Adjust the seat tilt (forward or backward) as shown in Diagram 6.
3. Wrench tighten the nut
4. Apply pressure to the seat and make sure that it does not move.
Readjust and retighten the nut, if needed.
29