Treadmill: Setting An Incline Limit; Treadmill: Accessing Performance Programs - Precor 954i Owner's Manual

Treadmill: Setting an Incline Limit

You can set the maximum grade (percent of incline) for the treadmill.
This limits the degree of incline and, consequently, the number of
incline settings that are available to the user. The available range is 0%
to 15% grade.
16. At the SET INCLINE LIMIT prompt, press OK. Use the up or
down arrow keys to select the desired grade.
17. When you are ready, press OK to accept the displayed setting and
move to the next feature. For other options, refer to Table 3.
Product Owner's Manual: Club Features
Treadmill: Accessing Performance
Programs
The performance-based Gerkin Fitness Test on the treadmill can be
hidden from the user's view and, consequently, be unavailable during
an exercise session.
If you keep the default factory setting, the TRACK program appears
when the PERFORMANCE key is pressed.
If you wish to change this setting, perform the following steps:
18. Press OK to review the current HIDDEN PROGRAMS selection.
Use an arrow key to alternate between the two selections.
Setting Description
SHOW Causes the Fitness Test to appear and replace the
PROGRAMS Track program when a user presses the
PERFORMANCE key.
HIDE Hides the Fitness Test and makes it inaccessible to
PROGRAMS the user. The TRACK Program appears when a user
presses the PERFORMANCE key.
19. When you are ready, press OK to accept the displayed setting and
move to the next feature. For other options, refer to Table 3.
19