User Id Entry With Csafe Equipment - Precor 954i Owner's Manual

User ID Entry with CSAFE Equipment

The equipment is fully compatible with CSAFE protocols. When the
equipment is connected to a CSAFE master device, the user is
prompted to press ENTER and begin an identification process.
The user ID is displayed as five zeros and indicates the starting point.
Table 6 describes key functions while in CSAFE mode
Table 6. Keys used to access CSAFE compatible equipment.
Keypad Description
Number keypad Use the number keys to enter a user ID. The number
that is pressed appears on the right. As the user
continues, the numbers fill in the display from right to
left. When all five numbers are in place, the user must
press ENTER or OK to submit the user ID.
CLEAR or BACK Erases individual numbers in the user ID from right to
left.
ENTER or OK Submits the user ID.
Note: User ID entry is bypassed when the user enters
five zeros. No workout statistics are recorded.
RESET Resets the display to the banner.
Product Owner's Manual: Club Features
A message appears on the display and indicates when the user ID is
accepted by the CSAFE master device. Once program selection is
complete, the user can begin exercising.
To review information about CSAFE specifications, visit the web site
at: www.fitlinxx.com/csafe
If you have questions or need technical support, refer to Obtaining
Service.
25