Inserting A Hard Drive Into The Multibay - Compaq Armada 7800 6266 T 5000 D M 1 Maintenance And Service Manual

Armada 7800 series
Table of Contents

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Inserting a Hard Drive into the MultiBay

If you are moving a hard drive from the hard drive bay to the MultiBay, remove the
hard drive from the hard drive tray. Refer to the "Removing a Hard Drive from the Hard
Drive Bay" section in this chapter for more information.
An Armada 7000 Hard Drive MultiBay Adapter is needed to insert a hard drive into the
MultiBay. This adapter is included with the purchase of an optional hard drive.
1. Save all work, exit all applications, and shut down the computer.
2. Push back the slide tab
(Figure 5-20).
3. Lower the hard drive
4. Slide the hard drive toward the connector
are seated.
Figure 5-20. Inserting a Hard Drive into a Broadway Hard Drive MultiBay Adapter
5. Release the slide tab.
6. Slide the hard drive assembly into the MultiBay with the bezel facing out.
5-22
Removal and Replacement Procedures
1
on the Armada 7000 Hard Drive MultiBay Adapter
2
into the adapter.
3
in the adapter until the connectors

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents