Removing A Hard Drive From The Multibay - Compaq Armada 7800 6266 T 5000 D M 1 Maintenance And Service Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTE: You can secure the hard drive assembly in the MultiBay using a single- or
dual-bay security screw included with the computer.

Removing a Hard Drive from the MultiBay

Before removing a hard drive, back up all information on the hard drive.
1. Save all work, exit all applications, and shut down the computer.
2. Tilt the computer at an angle
(Figure 5-21).
3. If the hard drive assembly is secured in the MultiBay with a single- or dual-bay
security screw
computer.
4. Slide the MultiBay release latch
5. Grasp the hard drive assembly using the recess
Figure 5-21. Releasing the Hard Drive Assembly from the MultiBay
1 so the bottom of the computer is accessible
2 , remove the screw with the security wrench included with the
3 toward the rear of the computer.
4 beneath the MultiBay.
Removal and Replacement Procedures 5-23