Ce27.Programming.software.instruction - Vertex Standard VXR-7000 Operating Manual

CE27 Programming Software Instruction
With the CE27 Programming Software, you can
quickly and easily program the Vertex Standard
VXR-7000 repeater 's channels and configuration
from your personal computer. Channel data pro-
gramming format is identical for VHF and UHF re-
peaters. In the event of an accidental memory failure,
repeater memory and configuration data may be re-
loaded in a matter of minutes.
Before connecting the VXR-7000 for programming,
turn off both the computer and the VXR-7000. Now
connect the FIF-10A (or FIF-12) + CT-104A USB Pro-
gramming Interface to the computer's USB port and
the VXR-7000's MIC jack.
Then it will be safe to restart the computer; turning
off the equipment during interconnection avoids the
potential for damage to the electronics caused by
voltage spikes.
Install the CE27 Programming Software onto your
computer's hard disk drive.
Browse to where the files were saved on the Hard
Drive in above step, then double-click the left mouse
button on the "CE27Win.exe" to start the program.
The introductory screen will appear.
Choose the "Help" contents option (F1) from the
program's Menu for assistance with channel pro-
gramming or setting of parameters.
Ch: [ Channel Number ]
This number (1 - 16) is used to identify the channel.
Channel numbers occur in sequence, and their order
can not be changed.
Double-click the left mouse button on the number to
toggle the operation of the channel (except "Ch1").
Rx Freq: [ Edit Receive (or simplex) Frequency ]
Use the [ 0 ] - [ 9 ] keys to enter the desired channel fre-
quency directly, and press the [ e
CTCSS Decoders:
[ Toggle CTCSS Decoder ON/OFF, sets CTCSS Frequency ]
Double-click the left mouse
button to display the "Tone.
Select" window, click the
left mouse button on the de-
sired tone, then click the left
mouse button on the [ OK ]
switch to accept the selected
tone.
8
Channel.Data.Items
] key.
Nter
VXR-7000 FM Repeater Operating Manual
Important.Note!
. Do. not. run. the. original. CE27. program-
ming. software. directly.. Copy. the. pro-
gramming. software. to. your. computer's.
hard.disk,.then.run.the.software.from.the.
copied. software. only.. Keep. the. original.
software. in. a. safe. place. in. case. you. need.
to.make.another.copy.of.it.at.a.later.date.
. Before. creating. the. programming. data.
for.your.VXR-7000.via.the.CE27.program-
ming.software,.upload.the.current.factory.
hardware. environment. data. from. the.
VXR-7000,.using.the.[F5].(ReadRom).com-
mand.. Use. this. data. profile. to. create. the.
programming.data.for.this.repeater.
VXR-7000 Programming Setup
DCS Decoders:
[ Toggle DCS Decoder ON/OFF, sets DCS Code # ]
D o u b l e - c l i c k t h e
left mouse button to
display the "Coded.
Select" window, click
the left mouse button
on the desired DCS
code, then click the
left mouse button on
the [ OK ] switch to ac-
cept the selected code.
W/N: Wide/Narrow Channel Spacing
This function selects the channel spacing environ-
ment in which the VXR-7000 operates.
W (Wide) = 25 kHz Channel Spacing, ±5 kHz
Deviation.
N (Narrow) = 12.5 kHz Channel Spacing, ±2.5
kHz Deviation.
Double-click the left mouse button to select the de-
sired channel spacing environment.
DESKTOP REPEATER
POWER
ANI
TX
BUSY
CH
AC
DC
ANI RESET
MIC
REPEATER REMOTE VOL SQL
VXR 7000
BASE LOCAL MONITOR ACCESSORY