Making A Group Call; Receiving A Group Call In Idle; Receiving A Group Call During An Ongoing Group Call; Dynamic Group Number Assignment (Dgna) - Motorola MTP3200 Feature User Manual

3.2.3 Making a Group Call

Procedure Steps
Press and hold the PTT button.
1
Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the PTT button to
2
listen.
The Group Call is received by all members of the selected group who have their units turned on and
are in range.

3.2.4 Receiving a Group Call in Idle

Procedure Steps
The radio receives a Group Call.
1
The incoming Group Call is signalled by a Receiving Group Call tone.
To respond, press and hold the PTT button.
2

3.2.5 Receiving a Group Call during an Ongoing Group Call

While in active Group Call, your radio receives a Group Call with a higher priority.
One of the following occurs:
• Your radio is forced to end the current group call and automatically join the incoming one.
• Your radio displays incoming group call screen with options:
– Join — ends current Group Call and starts the incoming one.
– End — cancels the incoming Group Call.

3.2.6 Dynamic Group Number Assignment (DGNA)

DGNA allows your service provider or authorized user to dynamically allocate new, or update existing talkgroups
to your radio over the air interface. Using supplementary services messages (SS-DGNA), the network operator
can command your radio to add talkgroups, update the existing talkgroups, or delete talkgroups from the list. This
operation is performed by transmitting the data to your radio.
-
3.2.3 Making a Group Call
3-3