Presser Lifter Mechanism (2) - Brother HE-800A Service Manual

2-15. Presser lifter mechanism (2)

4129Q
1. Remove the three bolts (1) and the four bolts (2), and then remove the pulse motor FT (for presser lifter) (3) and
the pulse motor N assembly (for needle zigzag) (4) from the motor bracket (5).
2. Remove the two set screws (6), and then remove the gear (7) from the pulse motor FT (for presser lifter) (3).
3. Remove the two set screws (8), and then remove the motor lever (9) from the pulse motor N assembly (for
needle zigzag) (4).
HE-800A
2. DISASSEMBLY
4130Q
37