Brother HE-800A Service Manual page 148

6. ELECTRIC COMPONENTS AND SOFTWARE
DIP switch B
No. ON/OFF
ON
1
OFF
ON
2
OFF
ON, ON, ON
ON, ON, OFF
ON, OFF, ON
ON, OFF, OFF
3, 4, 5
OFF, ON, ON
OFF, ON, OFF
OFF, OFF, ON
OFF, OFF, OFF
ON
6
OFF
ON, ON
ON, OFF
7, 8
OFF, ON
OFF, OFF
* If the programs are initialized when Nos. 3, 4 and 5 are set to OFF, OFF and ON respectively, the initial value for
parameter No. 02 - Cutter size will be set to 6.0 mm. (Normal default value is 13.0 mm.)
140
-
-
-
-
Panel DIP switches B - No. 7 and No. 8 are enabled.
Work clamp size: 7.3 × 36.0 mm (Sewing area: 6.0 × 32.0 mm)
Work clamp size: 7.3 × 24.5 mm (Sewing area: 6.0 × 20.0 mm)
Work clamp size: 6.8 × 36.0 mm (Sewing area: 5.4 × 32.0 mm)
Work clamp size: 6.8 × 24.5 mm (Sewing area: 5.4 × 20.0 mm)
Panel DIP switches B - No. 7 and No. 8 are enabled.
Work clamp size: 5.4 × 19.0 mm (Sewing area: 4.0 × 15.0 mm)
Panel DIP switches B - No. 7 and No. 8 are enabled.
Needle plate size: 5.4 mm
(Max. needle zigzag feed width = 4.0 mm)
Needle plate size: 7.3 mm
(Max. needle zigzag feed width = 6.0 mm)
Work clamp size: 7.3 × 47.0 mm (Sewing area: 6.0 × 40.0 mm)
Work clamp size: 6.8 × 47.0 mm (Sewing area: 5.4 × 40.0 mm)
Work clamp size: 5.4 × 24.5 mm (Sewing area: 4.0 × 20.0 mm)
Work clamp size: 5.4 × 36.0 mm (Sewing area: 4.0 × 32.0 mm)
HE-800A
Setting items Default
OFF
OFF
OFF, OFF, OFF
OFF
OFF, OFF