NordicTrack NTIVEL74014.0 User Manual page 9

STEP 8
Connect the Upper Computer Cable and
two hand pulse cable (6) with the cable on
the back of computer (1).Sit the computer
(1) onto its bracket and secure in place us-
ing the 4 screws.
STEP 9
Secure plastic cover (12) onto the handle-
bar post with a screw(11).
You need to plug the power adapter to start
using the product. See below how to do it.
Note:
Before using the machine, make sure all
the screws are fasten tightly.
HOW TO PLUG IN THE POWER ADAPTER IMPORTANT :
If the elliptical has been exposed to cold temperatures, allow it to warm to
room temperature before plugging in the power adapter. If you do not do this,
you may damage the console displays or other electronic components.
Plug the power adapter into the receptacle on the frame of the elliptical. Next, plug
the power adapter into the plug adapter. Then, plug the plug adapter into an appro-
priate outlet that is properly installed in accordance with all local codes and ordi-
nances.
Now your machine is ready for use.
1
9
11
12