Sony HDVF-EL75 Operation Manual page 48

Page Menu
03 PEAKING
04 MAGNIFICATION
05 PRESET
48
Using the Menu
Item Settings
(default in [
–99 to [0] to 99
SAT WIDTH
FREQUENCY L/[M]/MH/H
1 to [2] to 3
RANGE
MAGNIFICATION [OFF]/ON
MODE SEL [MODE1]/MODE2/
MODE3
[CENTER]/
MAG
a) UPPER/RIGHT/
POSITION
LOWER/LEFT
DISPLAY LEFT/[RIGHT]
POSITION
AUTO RELEASE [AUTO]/MANUAL
PRESET [OFF]/ON
–99 to [0] to 99
PRST BRIGHT
PRST –99 to [0] to 99
CONTRAST
[0] to 100
PRST PEAKING
–99 to [0] to 99
PRST CHROMA
Function
])
For specifying the saturation range of which edge
enhancement is to be performed.
For specifying the center frequency of edge enhancement
signals.
For specifying the variability of edge enhancement level.
For selecting normal display (OFF) or magnified display
(ON).
Normal display (OFF) is selected whenever the power is
turned on.
For selecting a magnification mode.
For selecting the area to magnify when the magnification
mode is enabled.
The "MAG POSITION" setting is linked to the "POSITION"
setting of the PEAKING menu.
CENTER: Magnifies the center area.
UPPER: Magnifies the upper area.
RIGHT: Magnifies the right area.
LOWER: Magnifies the lower area.
LEFT: Magnifies the left area.
For selecting the magnified display (sub display) position
When "MODE2" is selected in "MODE SEL."
LEFT: Displays the sub display in the lower left of the
screen.
RIGHT: Displays the sub display in the lower right of the
screen.
For specifying the manner in which the magnified display
returns to normal display.
AUTO: After the magnified display appears by pressing
ASSIGN. switch, the display returns to normal
automatically after the specified time.
MANUAL: After the magnified display appears by
pressing ASSIGN. switch, the display returns to
normal when ASSIGN. switch is pressed again.
For selecting whether to enable the settings of the BRIGHT,
CONTRAST, PEAKING controls and the chroma level in the
FUNCTION menu, or to enable the preset "PRST BRIGHT,"
"PRST CONTRAST," "PRST PEAKING," and "PRST
CHROMA" values in the PRESET menu.
OFF: Enables the settings of the controls and the preset
chroma level in the FUNCTION menu
ON: Enables the PRESET menu settings
For setting the image brightness when "ON" is selected in
"PRESET."
Raising the value increases the brightness of the image.
For setting the image contrast when "ON" is selected in
"PRESET."
Raising the value increases the contrast of the image.
For setting the peaking level when "ON" is selected in
"PRESET."
Raising the value increases the amount of correction.
For setting the chroma level when "ON" is selected in
"PRESET."
Raising the value increases the chroma level.